You are welcome to install your own Liteboxer Wall Mount. To do so, you will need to identify your wall type and/or stud material, and have the following tools and experience using them. If you do not have the required tools or experience, we recommend reaching out to a local contractor or handyman for support with installation at your own expense.
In addition to the Allen keys and Hardware included in the box, Liteboxer Wall Mount requires the following tools for installation:
Wall Type: Masonry (Concrete/Brick):
- Hammer Drill + 1/4" Masonry Bit + 1/2” Masonry Bit *
- Tape Measure
- Leveling Tool
- Marker
- Safety Glasses
*A hammer drill is required to ensure an accurate hole in a masonry wall. Failure to use a hammer drill may result in oversized holes which will not secure the Wall Mount. A masonry drill bit is required for hard walls to reduce the risk of cracking.
Wall Type: Wooden Studs with Painted Drywall:
- Power Drill + 7/32” drill bit
- Stud Finder *
- Tape Measure
- Pencil
- Leveling Tool
- Safety Glasses
*Ensure that your stud finder has the ability to distinguish between Wooden and Metal studs in your home’s construction. Metal studs are not a supported installation point for Liteboxer Wall Mount.
Be sure to check out our Installation and Assembly guide for a full breakdown on the process and its requirements.